Your Cart Is Empty
prime plus 1ltr: £8.50 5ltr: £25.00
From £8.50 to £25.00
Tilemaster Prime Plus is a highly advanced styrene butadiene polymer designed to prime, stabilise and seal substrates prior to the application of Tilemaster tile adhesives and self levelling compounds.
Tilemaster Prime Plus increases the adhesion and prolongs the working time of tile adhesives and self levelling compounds.
Tilemaster Prime Plus can be used on almost all substrates: Sand/Cement Screed, Concrete, Plywood Overlay (12mm min), Electric Underfloor Heating, Water/Wet System Underfloor Heating, Tile Backer Boards, Anhydrite Screeds, Plaster, Plasterboard, Fibre Cement Sheet, Cement/Sand Render, Concrete Brick/Block, T&G Floorboards, Floating Floors, Existing Vinyl Tiles, Steel/Metal Surfaces, Fibreglass and Green Screeds. Tilemaster Prime Plus can be used internally and externally.
Pack Sizes: 1 litre & 5 litre bottles
Coverage: 1 litre applied neat = 10m2, 1 litre diluted with 3 parts water = 40m2, 1 litre applied as a slurry coat = 18m2
Application Temperature: Between 5°C and 35°C
Drying Time Before Tiling: 30 – 45 minutes in ideal conditions. The drying/curing time will depend on the porosity of the substrate and ambient conditions/temperatures.
Drying Time Between Coats: Allow the first coat to become touch dry
Storage: Store unopened, clear of the ground in cool, dry conditions
Shelf Life: Stored correctly this product has a shelf life of 12 months
Colour: Light Green
Note: All work must be carried out in accordance with British Standard Code of Practice for floor and wall tiling BS5385
|Product Add ons|